Description
Diameter: The diameter of this blade is 254 mm, which is approximately 10 inches. This size is commonly used for table saws and larger miter saws.
Material: These blades are typically made from high-quality, hardened steel and feature carbide-tipped teeth for enhanced cutting performance and durability.
Teeth Count: The number of teeth on the blade can vary widely depending on the type of cuts it’s designed to make. More teeth typically result in a finer cut. For a blade of this size, it’s common to see anywhere from 40 to 80 teeth.
Bore Diameter: The bore diameter, also known as the arbor size, is dependent on the saw the blade is intended to fit. Common bore sizes for a blade of this diameter might be 25.4 mm or 30 mm.
Kerf Width: This is the thickness of the cut the blade makes in the material, determined by the thickness of the blade itself. For a blade of this size, you might expect a kerf width of around 2.4 to 3.4 mm.
Maximum RPM: The maximum RPM (revolutions per minute) is the maximum safe speed that the blade can rotate. This is dependent on the design and size of the blade. For a blade of this size, it might be in the range of 5000 to 6000 RPM.
Suitability: This blade would likely be suitable for cutting various materials, including hardwood, softwood, plywood, and other sheet materials, depending on its specific design.
Design Features: Blades in the "Expert Series" often come with additional features to improve performance and lifespan. This could include heat expansion slots to reduce warping, a special coating to reduce friction, or a specific tooth design for cleaner, faster cuts.
