Diameter: The diameter of this blade is 235 mm, equivalent to approximately 9.25 inches. This size is commonly used in larger handheld circular saws or smaller table saws.
Material: Blades in the "Expert Series" are typically made from high-quality, hardened steel with carbide-tipped teeth for high durability and cutting performance.
Teeth Count: The number of teeth on the blade can vary widely depending on the intended use of the blade. For a blade of this size, it’s common to see anywhere from 24 to 80 teeth. Fewer teeth often produce faster, but rougher cuts, while more teeth yield slower, but smoother cuts.
Bore Diameter: The size of the hole in the center of the blade, also known as the arbor size, will depend on the specific saw it’s designed to fit. Common bore sizes for a blade of this diameter might be 25 mm or 30 mm.
Kerf Width: This refers to the width of the cut that the blade makes in the material, determined by the thickness of the blade itself. For a blade of this size, you might expect a kerf width around 2.4 to 3.4 mm.
Maximum RPM: The maximum safe speed at which the blade can spin, measured in revolutions per minute (RPM), depends on the design of the blade. For a blade of this size, it might be in the range of 5000 to 7000 RPM.
Suitability: The blade’s design will determine the materials it’s capable of cutting. An "Expert Series" blade might be designed for cutting through a variety of materials including hardwoods, softwoods, plywood, and other sheet materials.
Design Features: Premium or "Expert" series blades often have additional features to improve performance such as anti-vibration slots, a special coating to reduce friction and heat, or a unique tooth design for efficient, clean cuts.
|Dimensions||20 × 20 × 20 cm|